Be Cautious When Choosing Roof Tiles

To evaluate whether a building is excellent, not only its shape and appearance, but more importantly, whether its lifespan is long enough and whether it can stand the test of time. The reason why some famous buildings are famous is because they are still standing after a hundred years. In fact, colored stone metal tiles are an important line of defense for buildings. The durable and excellent classic roof tiles  can make buildings stand safely in all kinds of bad weather.

So what are the outstanding functions of stone coated roofing tiles?

1. Strong decoration.

2. Thermal insulation.

3. Rainproof and leakproof.

A good building must be well protected throughout its life cycle, and tiles are its vital protective coat. For houses, roof tiles have the following three functions. After laying tiles on the roof, the roof should be tightly covered to isolate the rainwater from the roof well. No matter how heavy the rain is or how long it lasts, no matter how strong the wind blows, the rainwater is not allowed to seep into the house, otherwise the decoration and facilities in the house will be damaged. , so that it cannot be used for habitation, it will also damage the entire house structure, and even end its life.

Therefore, once it leaks, it will bring many troubles and infinite troubles to people. Therefore, leak prevention is the first important function. In recent years, people have developed stone coated metal tile, which better solve the problem of leak-proof houses.

classic roof tiles, the coat of protection of the house. With the improvement of people's living standards, higher requirements are naturally put forward for living conditions, and living comfort is one of the important indicators. To be comfortable, the insulation performance of the house must be good, and the roof tiles are responsible for this important task. The thickness of the tile itself is limited, only more than one millimeter, so it cannot be insulated from heat. The heat insulation depends on the layer of air tightly sealed under the tile. The tighter the seal, the better the heat insulation, otherwise the gap will not have much effect. This is the same as the principle of double-layer glass insulation. Although there is only a thin layer of air between the two layers of glass, as long as the four sides are tightly sealed, the heat insulation effect will be good. It will have no effect if it is ventilated from all sides.

The same is true for tiles. The stone coated metal tile produced by large factories have accurate dimensions, reasonable lap joint structure, and are not warped. After being built, they are like a whole and are tightly sealed. thermal effect. Small factory tiles, especially traditional tiles, are difficult to overlap tightly, and the thermal insulation performance is bound to be poor. The heat preservation effect of the two will be as much as 3°C-4°C worse. Therefore, when choosing tiles, you must overlap the tiles to see if they are tight. The stone coated roofing tiles is the "coat" of the house. The color of the tile, the design of the tile shape, and the quality of the pavement play a decisive role in the appearance of the building.

           The "coat" of roof tiles is much more important than a person's coat. If the coat is not suitable or beautiful, you can change it immediately, but tiles are not. If it is not suitable, it is not easy to change the tiles. Therefore, you must be cautious when choosing tiles, and you can't miss a major event by trying to save money for a while!
Classic Roof Tiles Suppliers