Generally, the grade and style orientation of the entire community can be seen through the roof of a house. The selection of roof materials for high-end villas and high-rise buildings is very important.

For houses, stone coated metal tile have the following three functions.

1. Rainproof and leakproof.

2. Thermal insulation.

3. Decorative

How to choose high-quality Custom Stone Coated Metal Roofing:

1. The color tone is soft and even, nice and bright, preferably matte. Small factory tiles are often unsightly in color due to poor materials and lack of attention to color tones.

2. There is no color difference between Custom Stone Coated Metal Roofing. After being installed in the room, the color of each tile is uniform, there is no difference in depth, and there is no mottle.

3. The color is durable, it will not fade by wind, sun and rain. Some small factories can't spray cement color paste evenly because of poor equipment and unqualified technology, so they use paint to spray color. This kind of stone coated metal tile peels off the paint in a short period of time, revealing the bottom, mottled and very ugly.

4. The tile-shaped slope is soft and beautiful. Big factory's tile shapes are carefully designed by experts from the perspective of art, and it will give people a beautiful and friendly feeling when laid on the roof. The small factory Sand Coated Roofing Sheet have not been designed with this kind of deliberation. After the stone coated metal tile are laid on the house, they give people a mechanical and stiff feeling, which is very uncomfortable to watch.

5. Accurate size, tight overlap, small paving error. Good stone coated metal roof tiles, after laying, are all in a straight line horizontally and vertically, as neat as printing, very beautiful. Large dimensional errors or warping often fail to pave well. No one can pave well with this kind of tile. For example, if there is only a 2mm error in tile width, if 100 custom stone coated metal roofing are lined up, there will be a difference of 20 cm, which is wider than half a wholesale Stone Coated Metal Roofing. If the Sand Coated Roofing Sheet is warped, the gap will be large after laying, and it will not be beautiful.

6. Good frost resistance. In the north, it is common for the temperature to drop below minus 10°C in winter. If the compactness of the Stone Coated Metal Roofing is not good and the water absorption rate is high, if snow water is absorbed during the day, the colored layer will swell and crack when it freezes at night, causing it to peel off slowly and damage the custom stone coated metal roofing. Because the Stone Coated Metal Roofing of small factories have not been squeezed by high pressure, their compactness is not good, and the service life of Sand Coated Roofing Sheet will not be long.

Roman Roof Tiles Suppliers