There are three parts to the installation of wholesale Stone Coated Steel Roof Suppliers on the roof of the building:

Installation of keel;

Installation of stone coated metal roof tile;

Installation of related accessories;

1) The installation of keel: A new or refurbished roof with 370 mm keels, either wooden strips or galvanized pipes.

2) Installation of stone coated metal roof tile: The installation order of the wholesale Stone Coated Steel Roof Suppliers is from bottom to top, the first tile is 20 mm from the eaves, the second tile is installed on the ridge in turn, and the excess part is cut or pulled down to a suitable position;

The tiles are misplaced and overlapped, and a single tile is fixed with six to seven steel nails. The initial layer is hexagonal dovetail nails, and the horizontal nails are cross dovetail nails.

3) Installation of related accessories:

a) Valley Tray for Sand Coated Roofing Sheet: Install the gutter first and then install the tiles. When installing the tiles in the gutter, pay attention to pre-laying before cutting the tiles, and then play the cutting line and hemming line. The tiles need to be folded down by 20mm. Align evenly.

b) Eaves Flashing for Stone Coated Metal Roof Tile: The cornice is mounted on top of a tile and is screwed in, and the tiles are then screwed when covering the cornice.

c) Barge Board Cover for wholesale Stone Coated Metal Roofing factory: The tiles are installed until the edge is folded up to 30mm, and then the gable is set on the tile, and then the side and the top of the gable are fixed with screws.

Whether it is a self-built house, a villa, a park or a community house, or a concrete structure, steel structure, wood structure, etc., the overall installation is convenient, labor costs are saved, and the work is fast.

Milano Roof Tile Suppliers