roof tile manufacturers: stone coated metal roof installation instructions should be kept in mind

The use of stone coated metal roof, has become fashionable. How can a magnificent house be without stone coated metal roof,? There are still some differences between the use of this material and traditional tiles. Its installation is indeed an important Question, today, let us find out together.

1. Before the installation of stone coated metal roofing, there must be a house inspection, and the roof should be flat. The stone coated metal roof tiles should be made of 40*40 wooden squares. When installing the water strips and tiles, the work should be done well. Each tile should be even, flat and firm, and its interface and cornice position should also be properly deal with.

2. When fixing the main tile nails, there should be no less than 5 nails, no less than 3 nails for the round ridge tile roof, and no less than 5 nails for the square ridge tile roof. The practice of flashing works should also meet the standards and requirements.

3. The folded width of the ridge tile side of the main tile should not be less than 50mm, and the length of the main tile protruding from the fascia should be about 20-30mm. The rolling knife that needs to be used when cutting the sheet.

4. The installation of stone coated metal roof tiles is a professional job, and the data of each part must comply with the rules and requirements. This is a manifestation of serious work and a kind of respect for human life.