The steps to Install stone coated metal tile

How to install stone coated metal tile? In fact, the installation process of the roofing tiles is not difficult, follow Zhejiang Jianzhan Technology Co., Ltd.  to see what the specific steps are it.

Stone Coated Metal tile Construction process

Metal tile construction process material machinery preparation → installation of vertical transportation machinery → roof protection frame erection → structural substrate repair and cleaning → measurement and alignment → shunshui bar hanging tile bar painting anti-corrosion paint installation → color stone metal tile paving → ridge tile installation → flooding edge → nail cap at the repair with glue → finished product protection

1. Tools: hammer, tape measure, ink bucket, cutting saw, moving bending machine, sealant, nails, electric drill and other tools.

2. Material preparation: when hanging stone coated metal roof, require the use of completely dry 25mm × 30mm wood, wood surface coating two layers of asphalt paint for anti-corrosion treatment.

The first thing to do is to measure the roof accurately, then in accordance with the wood keel row line put, will be 30mm wide, 25mm high wood square along the line fixed in the cement grass-roots level (along the water strip), roof foundation along the water line spacing is not more than 600mm, riveted into the grass-roots level depth is not less than 30mm. along the water strip installation is completed in the water strip nailed to hang tile strip, horizontal direction should be one after another to keep continuous, only in the gutter and Ridge control line on both sides of the break; spacing 368-370mm.