Installation of stone coated metal roofing sheets

The Role of stone coated metal roofing sheets Ridge tile

Commonly speaking, the tile on the ridge is the ridge tile, in terms of adaptability can be understood as the same part of the drainage can be to both sides.

While the cover tile for the slope of the tile, can be understood as the same part of only one-way drainage. The image of the Forbidden City as an example, the prongs of the maiden shape on the ridge tile, the role is to drain to both sides, the prongs between the face of the cover tile, the role is to drain along the face down.

 Stone coated metal roofing sheets ridge tile type

We have two types of Ridge Cap,no matter which type ridge tile, the method of installation is similar:   
                                         

                   Circular Ridge Cap                                                  Angle Ridge Cap

Ridge Mount

main ridge

Note:

(1) The ports on both sides of the ridge tile should be blocked, which should be tight, flat and beautiful.

(2) The width of the upper fold of the main tile on the side of the ridge tile should not be less than 50 mm.

(3) The joints between the ridge tiles should be tightly lapped and evenly spaced; the joints between the ridge tiles and the slanting ridge should be tight, straight and flat, without undulation and leakage.

(4) The joints between the ridge and the sloping ridge should be sealed with sealing materials.Roof Ridge tiles use special ridge tile accessories of colored stone metal tiles.